Recent Searches

Loading Search Results...
Loading Directory Results...
Close

History

Close

Recent Pages

Recent Searches

Bachelor of Science in Computer and Information Technology

Faculty Listing

Dr. Wutthigrai Boonsuk, Associate Professor

Office: 3134 - Klehm Hall
Phone: 2175815772
Email: wboonsuk@eiu.edu

Wutthigrai Boonsuk's Vita

Frequently Taught Courses

Undergraduate Courses:
AET 4803 – Plant Layout and Material Handling
AET 4763 – Rapid Prototyping Technology
AET 1263 – Material Technology
EGT 4943 – Manufacturing Management
EGT 4843 – Statistical Quality Assurance
EGT 4753 – Lean Manufacturing
EGT 3763 – Automation and Data Capture
EGT 3103 – Robots and Control Systems

Graduate Courses:
TEC 5323 – Advanced Database Technology
TEC 5243 - Design for Quality
TEC 5133 - Total Quality Systems

Education

Ph.D., Industrial and Manufacturing Systems Engineering, Iowa State University, 2009
M.S., Human Computer Interaction, Iowa State University, 2011
M.S., Industrial and Manufacturing Systems Engineering, Iowa State University, 2005
Graduate Certificate in Geographic Information System, Iowa State University, 2011

Research

Manufacturing Systems, Robotics, Automation, Human Computer Interaction, Virtual Reality, and Geographic Information System (GIS)

Selected Publications

Boonsuk, W. (2019). Design of a Teleoperated Mobile Robotic System with a Virtual Reality Interface. The Technology Interface International Journal (TIIJ), 20(1), 5-10.

Boonsuk, W., & Przygoda, N. (2017). Pattern Learning for Economical Prosthetic Hands using Leap Motion Sensors. The International Journal of Engineering Research and Innovation (IJERI), 9(2), 35-40.

Patel, A., Naseri, S., & Boonsuk, W. (2017). Performance Analysis of ToF Ranging Sensor. Proceeding of the 2017 Associated of Technology, Management, and Applied Engineering (ATMAE) Conference, Cincinnati, OH.

Boonsuk, W. (2016). Investigating the Effects of Stereo Camera Baseline on the Accuracy of 3D Projection for Industrial Robotic Applications. The International Journal of Engineering Research and Innovation, 8(2), 94-98.

Boonsuk, W. (2015). Usability of stereoscopic view in teleoperation. Proceeding of the International Society of Optics and Photonic (SPIE) – the Society for Imaging Science and Technology (IS&T) Electronic Imaging: Stereoscopic Displays and Applications XXVI, 93911G. doi:10.1117/12.2083383.

Boonsuk, W., & Harding, C. (2014). Possibility space for GIS suitability analysis. Proceeding of SPIE-IS&T Electronic Imaging: Visualization and Data Analysis, 9017R, doi:10.1117/12.2040165.

West, R., Bailey, K., Tiernan, B., Boonsuk, W., & Gilbert, S. (2012). The Temporal Dynamics of Medial and Lateral Frontal Neural Activity Related to Adaptive Cognitive Control. Neuropsychologia, 50(14), 3450-3460.

Boonsuk, W., Frank M. C. (2009). Automated fixture design for a rapid machining process. Rapid Prototyping Journal, 15(2), 111-125 (Received Highly Commended paper Award for Excellence, 2010).

Selected Conference Presentations

Boonsuk, W., Liu, P. P. (2019). Usability of Voice-Activated Smart Home Device Technology for Older Adults. Presented at the International Convention of Psychological Science (ICPS), Paris, France.

Boonsuk, W., Bai, B., Liu, P. P., & Bai, R. (2019). Reducing Energy Cost Through the Use of Smart Home Devices and Historical Pricing Data. Presented at the Associated of Technology, Management, and Applied Engineering (ATMAE) Conference: Fueling the Fourth Industrial Revolution Industry 4.0, Charlotte, NC.

Boonsuk, W., Eveland, D., Miller, J., & Slaven, I. (2019). Immersive Simulation Training in Virtual Reality: A Case Study of Climbing Cell Tower. Presented at the Associated of Technology, Management, and Applied Engineering (ATMAE) Conference: Fueling the Fourth Industrial Revolution Industry 4.0, Charlotte, NC.

Boonsuk, W., Przygoda, N., Bai, R., & Liu, P. P. (2018). Altering Consumer Behaviors for Energy Cost Saving Using Utility Pricing Policy Models and Smart Grid Technology. Presented at the Associated of Technology, Management, and Applied Engineering (ATMAE) Conference: The Future Starts Here, Kansas City, Missouri.

Boonsuk, W. (2017). Three-dimensional RGB-D Camera Sensor Usage for Industrial Robotics Applications. Presented at the Associated of Technology, Management, and Applied Engineering (ATMAE) Conference: Constructing a Future for Tomorrow, Cincinnati, OH.

Patel, A., Naseri, S., & Boonsuk, W. (2017). Performance Analysis for Time-of-Flight Ranging Sensor. Presented at the Associated of Technology, Management, and Applied Engineering (ATMAE) Conference: Constructing a Future for Tomorrow, Cincinnati, OH.

Boonsuk, W., Liu, P. P., & Surjadi, F. F. (2017). Designing Web-based Interface for Older Adults’ Technology Utilization. Presented at the International Convention of Psychological Science (ICPS), Vienna, Austria.

Boonsuk, W. (2016). Development of Mobile Robot for 3D Indoor Mapping Using Lidar Sensor. Presented at the Associated of Technology, Management, and Applied Engineering (ATMAE) Conference: Entering the Future, Orlando, FL.

+Chandler, J. O., Liu, P., Boonsuk, W., & Kronenfeld, B. J. (2016). GIS Application for Sustainable Energy. Presented at the Associated of Technology, Management, and Applied Engineering (ATMAE) Conference: Entering the Future, Orlando, FL.

Boonsuk, W. (2016). Investigating the Effects of Stereo Baseline Distance on Accuracy of 3D Projection for Industrial Robotic Applications. Presented at the 5th International Association of Journals & Conferences (IAJC)/International Society of Agile Manufacturing (ISAM) Joint International Conference on Engineering & Technology, Orlando, FL.

Boonsuk, W. (2015). Usability of stereoscopic view in teleoperation. Proceeding of the International Society of Optics and Photonic(SPIE) – the Society for Imaging Science and Technology (IS&T) Electronic Imaging: Stereoscopic Displays and Applications XXVI, 93911G. doi:10.1117/12.2083383.

Boonsuk, W. (2015). Evaluation of Stereoscopic Vision for Manufacturing Applications. Presented at the Association of Technology, Management, and Applied Engineering (ATMAE) Conference: Building Bridges, Pittsburgh, PA.

Boonsuk, W. & Surjadi, F. F. (2015). Gender Differences in 3D Stereoscopic Vision for Teleoperation. Presented at the International Convention of Psychological Science (ICPS), Amsterdam, The Netherlands.

Boonsuk, W. (2014). Development of GIS-Based Approach for Facilities Layout Planning. Presented at the ATMAE Conference: Technology-Tomorrow’s Gateway, St. Louis, MO.

Boonsuk, W., & Harding, C. (2014). Possibility space for GIS suitability analysis. Proceeding of SPIE-IS&T Electronic Imaging: Visualization and Data Analysis, 9017R. doi:10.1117/12.2040165.

Boonsuk, W. (2013). Rapid Prototyping: Concept, Technology, and Applications. EIU Technology & Science Symposium: Revolutions in Science and Technology Paradigms, Charleston, IL.

Boonsuk, W., Gilbert, S., & Kelly, J. W. (2012). The Impact of Three Interfaces for 360-Degree Video on Spatial Cognition. Proceedings of the 2012 Annual Conference on Human Factors in Computing Systems, Austin, TX.

Gilbert, S., Boonsuk, W., & Kelly, J. W. (2012). Virtual displays for 360-degree video. Proceedings of 2012 Imaging Science & Technology (IS&T) and SPIE Electronic Imaging 8291, 82911L.

Boonsuk, W., Gilbert, S., & Kelly, J. W. (2011). Usability Study for 360-Degree View Interfaces. Emerging Technologies Conference, Ames, IA.

Boonsuk, W., & Gilbert, S. (2010). Surveillance Interface for Virtual Training. ASME World Conference on Innovative Virtual Reality (WINVR), Ames, IA.

Boonsuk, W. (2010). Automated Separation of Bone Joints for Medical Image Reconstruction. Graduate Seminar Series, Department of Industrial Engineering, Iowa State University, Ames, IA.

Boonsuk, W., & Frank M. C. (2008). An Algorithm for Registering Medical Images for Biomedical Manufacturing. Institute of Industrial Engineers (IIE) Annual Conference and Exposition, Vancouver, BC.

Boonsuk, W., Busch, S. V., Peters, F., & Jackman, J. (2007). Surface Characterization Mapping and Analysis. Proceedings of the Steel Founders’ Society of America - Technical and Operating Conference, Chicago, IL.

Boonsuk, W., & Frank M. C. (2005). The Use of Sacrificial Support Structures in a Rapid Machining Process. Institute of Industrial Engineers (IIE) Annual Conference and Exposition, Atlanta, GA.
 


Faculty/Staff Login to Update Info

Related Pages

Contact Information

Dr. Toqeer Israr, PhD, PEng
CIT Program Coordinator

School of Technology
Eastern Illinois University
4513 Lumpkin Hall,
600 Lincoln Avenue
Charleston, Illinois 61920
(217) 581-2721
taisrar@eiu.edu


Take the next step

apply now
schedule a visit

Give to EIU

Every gift made to Eastern Illinois University -- whether it's big or small -- makes a difference. EIU's generous donors are helping our students fulfill their dreams every day, and you can be part of that.

Learn more about how to make your contribution today!