Dr. Wutthigrai Boonsuk
Office: 3134 - Klehm Hall
Frequently Taught CoursesUndergraduate Courses:
AET 4943 - Manufacturing Management
AET 4803 - Plant Layout and Material Handling
AET 4763 - Rapid Prototyping Technology
AET 4753 - Lean Manufacturing
AET 3103 - Robots and Control Systems
AET 1263 - Material Technology
TEC 5243 - Design for Quality
TEC 5133 - Total Quality Systems
EducationPh.D., Industrial and Manufacturing Systems Engineering, Iowa State University, 2009
M.S., Human Computer Interaction, Iowa State University, 2011
M.S., Industrial and Manufacturing Systems Engineering, Iowa State University, 2005
Graduate Certificate in Geographic Information System, Iowa State University, 2011
ResearchCAD/CAM, Rapid Prototyping, manufacturing systems, Robotics, User Interface (UI) and User Experience (UX) design, virtual reality, and Geographic Information System (GIS)
Selected PublicationsWest, R., Bailey, K., Tiernan, B., Boonsuk, W., & Gilbert, S. (2012). The Temporal Dynamics of Medial and Lateral Frontal Neural Activity Related to Adaptive Cognitive Control. Neuropsychologia, 50(14), 3450-3460.
Boonsuk, W., Frank M. C. (2009). Automated fixture design for a rapid machining process. Rapid Prototyping Journal, 15(2), 111-125 (Received Highly Commended paper Award for Excellence, 2010).
Selected Conference PresentationsBoonsuk, W. (2016). Development of Mobile Robot for 3D Indoor Mapping Using Lidar Sensor. Presented at the Associated of Technology, Management, and Applied Engineering (ATMAE) Conference: Entering the Future, Orlando, FL.
+Chandler, J. O., Liu, P., Boonsuk, W., & Kronenfeld, B. J. (2016). GIS Application for Sustainable Energy. Presented at the Associated of Technology, Management, and Applied Engineering (ATMAE) Conference: Entering the Future, Orlando, FL.
Boonsuk, W. (2016). Investigating the Effects of Stereo Baseline Distance on Accuracy of 3D Projection for Industrial Robotic Applications. Presented at the 5th International Association of Journals & Conferences (IAJC)/International Society of Agile Manufacturing (ISAM) Joint International Conference on Engineering & Technology, Orlando, FL.
Boonsuk, W. (2015). Usability of stereoscopic view in teleoperation. Proceeding of the International Society of Optics and Photonic(SPIE) – the Society for Imaging Science and Technology (IS&T) Electronic Imaging: Stereoscopic Displays and Applications XXVI, 93911G. doi:10.1117/12.2083383.
Boonsuk, W. (2015). Evaluation of Stereoscopic Vision for Manufacturing Applications. Presented at the Association of Technology, Management, and Applied Engineering (ATMAE) Conference: Building Bridges, Pittsburgh, PA.
Boonsuk, W. & Surjadi, F. F. (2015). Gender Differences in 3D Stereoscopic Vision for Teleoperation. Presented at the International Convention of Psychological Science (ICPS), Amsterdam, The Netherlands.
Boonsuk, W. (2014). Development of GIS-Based Approach for Facilities Layout Planning. Presented at the ATMAE Conference: Technology-Tomorrow’s Gateway, St. Louis, MO.
Boonsuk, W., & Harding, C. (2014). Possibility space for GIS suitability analysis. Proceeding of SPIE-IS&T Electronic Imaging: Visualization and Data Analysis, 9017R. doi:10.1117/12.2040165.
Boonsuk, W. (2013). Rapid Prototyping: Concept, Technology, and Applications. EIU Technology & Science Symposium: Revolutions in Science and Technology Paradigms, Charleston, IL.
Boonsuk, W., Gilbert, S., & Kelly, J. W. (2012). The Impact of Three Interfaces for 360-Degree Video on Spatial Cognition. Proceedings of the 2012 Annual Conference on Human Factors in Computing Systems, Austin, TX.
Gilbert, S., Boonsuk, W., & Kelly, J. W. (2012). Virtual displays for 360-degree video. Proceedings of 2012 Imaging Science & Technology (IS&T) and SPIE Electronic Imaging 8291, 82911L.
Boonsuk, W., Gilbert, S., & Kelly, J. W. (2011). Usability Study for 360-Degree View Interfaces. Emerging Technologies Conference, Ames, IA.
Boonsuk, W., & Gilbert, S. (2010). Surveillance Interface for Virtual Training. ASME World Conference on Innovative Virtual Reality (WINVR), Ames, IA.
Boonsuk, W. (2010). Automated Separation of Bone Joints for Medical Image Reconstruction. Graduate Seminar Series, Department of Industrial Engineering, Iowa State University, Ames, IA.
Boonsuk, W., & Frank M. C. (2008). An Algorithm for Registering Medical Images for Biomedical Manufacturing. Institute of Industrial Engineers (IIE) Annual Conference and Exposition, Vancouver, BC.
Boonsuk, W., Busch, S. V., Peters, F., & Jackman, J. (2007). Surface Characterization Mapping and Analysis. Proceedings of the Steel Founders’ Society of America - Technical and Operating Conference, Chicago, IL.
Boonsuk, W., & Frank M. C. (2005). The Use of Sacrificial Support Structures in a Rapid Machining Process. Institute of Industrial Engineers (IIE) Annual Conference and Exposition, Atlanta, GA.